Airpulse A200

Studio-quality Speakers Designed by Phil Jones

Select_Colour: Cherry

Nav_Back_to Speakers
Product_Overview
Product_Specification
faq
Product_Support

Design

The aesthetic AirPulse’s A200 is designed by Phil Jones. The cabinets are made from 25mm MDF. 36mm professional-grade sound absorption material is applied to reduce unwanted coloration in sound.

Ribbon Tweeter

The horn-loaded ribbon tweeter features phase correction to improve upon frequency response. The ribbon tweeter has a low resistance of 0.2 ohms, ensuring a wide range of frequency responses.

Aluminum Mid-woofer

The A200 active bookshelf speakers have a 5.5-inch aluminum alloy cone mid-range woofer unit.

Specification

Signal-to-Noise Rate:

≥ 90dB(A)

Total_Output_Power_RMS:

L/R(Treble)10W + 10W
L/R(Min-Range and Woofer) : 55W + 55W

Frequency_Response_No_Group:

46Hz - 20kHz

Audio_Inputs:

AUX, Balance Input, Optical, Coaxial, Bluetooth

lnput_Sensitivity:

AUX: 550 ± 50mV
Balance: 1300 ± 50mV
Optical: 350 ± 50mFFs
Coaxial: 350 ± 50mFFs
Bluetooth: 1000 ± 50mFFs

Bluetooth_Version_No_Group:

V5.0

Dimensions_W_x_H_x_D:

225mm x 355mm x 295mm

Net_Weight:

19kg

faq
Why can’t I hear any sound?

Please check the following points: 1) The power indicator light should be ON 2) Try to turn up the volume 3) Make sure the audio cables are correctly connected 4) Make sure you set the input correctly on the speakers 5) The audio source should deliver a signal output

Why can’t I connect my speakers via Bluetooth?

Please check the below points: 1) Make sure your speaker is switched to Bluetooth mode. Disconnect any other devices from your speakers 2) Ensure the transmission range is within 10 meters. 3) Try another Bluetooth device for connection

Why can’t I turn on the speakers?

You can turn on the speakers by one of the following methods: 1) Connect the main power of your speakers 2) Switch on the wall outlet of your speakers

Email_Sign_Up_title
Email_Sigin_Up_subtitle