- Ecouteurs sans fil Tous Ecouteurs sans fil
- Casques supra et intra-auriculaires Tous Casques supra et intra-auriculaires
- Casques filaires Tous Casques filaires
- Casques sans fil Tous Casques sans fil
R1280DBs
Choisissez la couleur: Black
Room-filling Sound
With 4 driver units, this product can produce 42 watts (RMS) output power, best fitting any space in your house for a great listening experience.
Quality Sound Performance
With the enrichment of 2-way active crossover control, this product is perfectly tuned to satisfy your pursuit of quality sound. Two 4-inch mid-range / bass drivers create rich lows. Meanwhile, two 0.5-inch silk diaphragm treble drivers produce crisp highs.
Classic Wooden Enclosure
Quality wooden enclosure minimizes acoustic resonance and further reduces distortion. The classic design complements any home decor as well.
Multiple Inputs and Bass Output
Line In, Coaxial, and Optical ports are ready for the connection with multiple devices. To scale up to a 2.1 music system, connect a subwoofer to the Sub Out port and then enjoy more powerful bass output.
Easy Control
Use the remote control or knobs on the right panel for easy control of full functions.
Signal-to-Noise Rate:
≥ 85dB(A)
Dimensions (W x H x Dmm):
196 × 146 × 234mm
Total_Output_Power_RMS:
21W + 21W
Driver_Units:
4" (Mid-range and bass) + 0.5" (Treble)
Frequency_Response_No_Group:
51Hz - 20kHz
Audio_Inputs:
Bluetooth, Line In, Optical, Coaxial
lnput_Sensitivity:
LINE In 1 R/L: 500 ± 50mV
LINE In 2 R/L: 600 ± 50mV
Optical / Coaxial R/L: 350 ± 50mFFS
Bluetooth R/L:700 ± 50mFFS
Net_Weight:
4.9kg
Please check the following points:
1) The power indicator light should be ON
2) Try to turn up the volume
3) Make sure the audio cables are correctly connected
4) Make sure you set the input correctly on the speakers
5) The audio source should deliver a signal output
Please check the below points:
1) Make sure your speaker is switched to Bluetooth mode. Disconnect any other devices from your speakers
2) Ensure the transmission range is within 10 meters
3) Try another Bluetooth device for connection
You can turn on the Edifier speakers by one of the following methods:
1) Connect the main power of your speakers
2) Switch on the wall outlet of your speakers
Please switch the system of these speakers to the active mode, and remove the audio source. There will be no problem with these speakers if you can't hear noises from 1 meter away.