S3000 Pro

Back to Speakers

Overview

Specification

FAQ

Support

Symmetric Design Dual Main Speakers

For the first time, the S3000Pro introduces dual main speakers that features an acoustic crossover management and power simplifier system. With the independent left and right balanced design, the speakers are able to achieve a uniquely balanced sound.

Wireless Connection

The S3000Pro features true wireless innovations thanks to KLEERNET technology, which supports professional-grade wireless transmission that frees users from the shackles of wires so that the speakers can be freely placed anywhere while still maintaining its high-fidelity wireless sound quality.

Shocking Experience

As Edifier’s newest flagship product, the S3000Pro has upgraded its driver unit and passed the HiRes standard in order to offer an extremely immersive sound experience for its users.

All Digital Audio Processing

In the digital HD generation, high-fidelity all-digital audio processing tech has become the mainstream audio solution. The digital interface has a high bit stream processing capability of up to 24Bit/192kHz, which supports the transmission of PCM and SPDIF lossless formatted music files.

High-level digital-to-analog analog-to-digital conversion chip

The S3000Pro’s digital interface uses a higher specification DAC chip, PCM5242, which supports a maximum input sampling rate of 32Bit/382kHz with a signal-to-noise ratio of up to 114dB. This allows for a digital signal transmission with almost zero loss.

XMOS Professional Audio Processing

For audiophiles, XMOS’ xCore multicore processor has always been regarded as a leading solution for high-end, high-fidelity audio. The S3000Pro’s built-in 16-core chipset, u216, has powerful computing capabilities of up to 2000 MIPS and unique internal architecture of parallel signal processing, which makes it naturally suitable for processing a playback of time-sensitive signals such as audio.

DSP Processor

Both speakers on the S3000Pro are equipped with a TI professional audio processing chip, TLV320A-IC3268, for independent electronic frequency division and management of the treble, mid and bass tones, and can control frequency allocation.

Bluetooth 5.0 Module

The S3000Pro is complete with the Qualcomm CSR8675 Bluetooth 5.0 chipset, with a built-in AptX DH decoder, which supports the 24bit/96KHz transmission to provide lossless music.

Specification

Signal-to-Noise Rate:

≥ 90dB(A)

Noise Level:

≤ 25dB(A)

Total Output Power (RMS):

L/R (treble): 15W+15W
L/R (mid-range bass): 50W + 50W

Frequency Response:

45Hz - 40KHz

Audio Inputs:

Line In 1, Line In 2, Optical, Coaxial, Bluetooth

lnput Sensitivity:

Line In 1: 800 ± 50mV;
Line In 2: 600 ± 50mV;
Optical / Coaxial: 350 ± 50mFFS;
Bluetooth: 450 ± 50mFFS

Net Weight:

17.14kg

FAQ

Why can’t I hear any sound?

Please check the following points: 1) The power indicator light should be ON 2) Try to turn up the volume 3) Make sure the audio cables are correctly connected 4) Make sure you set the input correctly on the speakers 5) The audio source should deliver a signal output

Why can’t I connect my speakers via Bluetooth?

Please check the below points: 1) Make sure your speaker is switched to Bluetooth mode. Disconnect any other devices from your speakers 2) Ensure the transmission range is within 10 meters. 3) Try another Bluetooth device for connection

Why can’t I turn on the speakers?

You can turn on the Edifier bookshelf speakers by one of the following methods: 1) Connect the main power of your speakers 2) Switch on the wall outlet of your speakers

Support Product and technical support

Download User Manual

Studio Quality Sound