S50DB

Specification

Signal-to-Noise Rate:

≥ 85dB (A)

Input sensitivity:

AUX: R/L:400±50mV
Bluetooth: R/L:500±50mFFS
LINE IN: R/L:600±50mV
OPT/COA: R/L:350±50mFFS

Noise Level:

≤ 25dB (A)

Total Output Power (RMS):

L/R (treble): 12W+12W RMS
L/R (mid-range&bass): 32W+32W RMS

Driver:

2 ¾" (Mid-Range / Bass) + ¾" (Tweeter)

Frequency Response:

55Hz - 20kHz

Audio Inputs:

AUX, Bluetooth, Coaxial, Optical, Line in

Dimensions (W x H x D):

1120mm x 120mm x 100 mm

FAQ

Why can’t I hear any sound?

Please check the following points: 1) The power indicator light should be ON 2) Try to turn up the volume 3) Make sure the audio cables are correctly connected 4) Make sure you set the input correctly on the speakers 5) The audio source should deliver a signal output

Why can’t I connect my speakers via Bluetooth?

Please check the below points: 1) Make sure your Edifier speakers are switched to Bluetooth mode. Disconnect any other devices from your speakers 2) Ensure the transmission range is within 10 meters. 3) Try another Bluetooth device for connection

Why can’t I turn on the speakers?

You can turn on the speakers by one of the following methods: 1) Connect the main power of your speakers 2) Switch on the wall outlet of your speakers

Email Sign Up

Submit

Please enter a valid email address

I agree to the Terms of Use and Privacy Policy

Please enter checkbox

Thank you for subscribing to our newsletter!

Hi-Res Audio Qualified Soundbar