- Ecouteurs sans fil Tous Ecouteurs sans fil
- Casques supra et intra-auriculaires Tous Casques supra et intra-auriculaires
- Casques filaires Tous Casques filaires
- Casques sans fil Tous Casques sans fil
Airpulse A200
Choisissez la couleur: Cherry
Design
The aesthetic AirPulse’s A200 is designed by Phil Jones. The cabinets are made from 25mm MDF. 36mm professional-grade sound absorption material is applied to reduce unwanted coloration in sound.
Ribbon Tweeter
The horn-loaded ribbon tweeter features phase correction to improve upon frequency response. The ribbon tweeter has a low resistance of 0.2 ohms, ensuring a wide range of frequency responses.
Aluminum Mid-woofer
The A200 active bookshelf speakers have a 5.5-inch aluminum alloy cone mid-range woofer unit.
Signal-to-Noise Rate:
≥ 90dB(A)
Total Output Power (RMS):
L/R(Treble)10W + 10W
L/R(Min-Range and Woofer) : 55W + 55W
Frequency Response:
46Hz - 20kHz
Audio Inputs:
AUX, Balance Input, Optical, Coaxial, Bluetooth
lnput Sensitivity:
AUX: 550 ± 50mV
Balance: 1300 ± 50mV
Optical: 350 ± 50mFFs
Coaxial: 350 ± 50mFFs
Bluetooth: 1000 ± 50mFFs
Bluetooth:
V5.0
Dimensions (W x H x D):
225mm x 355mm x 295mm
Net Weight:
19kg
Please check the following points: 1) The power indicator light should be ON 2) Try to turn up the volume 3) Make sure the audio cables are correctly connected 4) Make sure you set the input correctly on the speakers 5) The audio source should deliver a signal output
Please check the below points: 1) Make sure your speaker is switched to Bluetooth mode. Disconnect any other devices from your speakers 2) Ensure the transmission range is within 10 meters. 3) Try another Bluetooth device for connection
You can turn on the speakers by one of the following methods: 1) Connect the main power of your speakers 2) Switch on the wall outlet of your speakers