- Ecouteurs sans fil Tous Ecouteurs sans fil
- Casques supra et intra-auriculaires Tous Casques supra et intra-auriculaires
- Casques filaires Tous Casques filaires
- Casques sans fil Tous Casques sans fil
S50DB
Choisissez la couleur: Black
Exceptional Style
The S50DB soundbar uses sturdy wooden materials, and the wooden surface is created by a fine procedure.
Easy Connections
The S50DB soundbar has optical and coaxial connections available for you to easily interface with TVs, set-top boxes, Blu-ray DVD players, and other sound sources.
Titanium Treble
The tweeters of this unit give clear unique sound and HiFi proliferation. The titanium film vault recreates sensitive points of interest in execution.
Technology Innovation
The S50DB soundbar applies a Texas Instruments chip that ensures an advanced sound signal and streamlines treble contortion and sound floor.
Signal-to-Noise Rate:
≥ 85dB (A)
Input sensitivity:
AUX: R/L:400±50mV
Bluetooth: R/L:500±50mFFS
LINE IN: R/L:600±50mV
OPT/COA: R/L:350±50mFFS
Noise Level:
≤ 25dB (A)
Total Output Power (RMS):
L/R (treble): 12W+12W RMS
L/R (mid-range&bass): 32W+32W RMS
Driver:
2 ¾" (Mid-Range / Bass) + ¾" (Tweeter)
Frequency Response:
55Hz - 20kHz
Audio Inputs:
AUX, Bluetooth, Coaxial, Optical, Line in
Dimensions (W x H x D):
1120mm x 120mm x 100 mm
Please check the following points: 1) The power indicator light should be ON 2) Try to turn up the volume 3) Make sure the audio cables are correctly connected 4) Make sure you set the input correctly on the speakers 5) The audio source should deliver a signal output
Please check the below points: 1) Make sure your Edifier speakers are switched to Bluetooth mode. Disconnect any other devices from your speakers 2) Ensure the transmission range is within 10 meters. 3) Try another Bluetooth device for connection
You can turn on the speakers by one of the following methods: 1) Connect the main power of your speakers 2) Switch on the wall outlet of your speakers